Products details

首页 > Products > > Mini New Nail Art Drill 30,000RPM Strong Pedicure Machine
Mini New Nail Art Drill 30,000RPM Strong Pedicure Machine
  • Mini New Nail Art Drill 30,000RPM Strong Pedicure Machine
  • Mini New Nail Art Drill 30,000RPM Strong Pedicure Machine
  • serial:ZS-217
  • Category:
  • Hits:16


Mini New Nail Art Drill 30,000RPM Strong Pedicure Machine

* Electric Nail File Drill Machine

* Nail drill machine

* Nail dryer

220V-240V,50Hz 110V-120V,60Hz
White,Pink,Sliver,Black,Red,etc. Or according to your Requirement
(1)Sample Order: 1 piece of each model (2)Usual Order: 16 pieces of each model.

Product use:

ZS-217H nail power grinding machine configuration details:

Plug in the electric cord of the transformer to the main electric outlet

Turn on the on/off switch on the transformer.(machine should be at the lowest speed when turning on)

Select the desired speed by turning the variable speed control knob on the transformer

The black switch in front of the transformer, next to the speed control selection knob is for forward and reverse rotation direction

To use the foot pedal control,connect the end of the cord from the foot pedel to the out put hole at the front of the transformer and press down on the foot pedal

To secure the bits: push in the desired bit firmly into the hole at the rotating head of the hand piece until the second lock click.(please note the bit has to pass through)

To remove the bits: turn off the machine and gently pull the bit out.


Elegant appearence style,simple elegant modeling

Stable performance and high quality can be used in environment

Input voltage rage:AC110-120V,220-240V,50/60HZ for worldwide

Output power supply scope:DC1.25-17V,continuously adjustment

The handset adopts the card buckles tight struture,safety,conveniently,disasembles

Transmission system adopt sthe structure of dual asorption of shock, extremely quiet and smooth.

Maximum rotation speed 30000 rpm

Available forward and reverse switch

Safety configuration for over-voltage and over-load

Safety Rules:

Always unplug the tool when you change accessory or collet.

Do not engage the shaft lock button while the tool is running.

Do not use near or place in water.if motor falls into water, unplug not reach into water.

Do not touch the bit after use. The bit is too hot to be touched by bare hands.

Keep dust out of eyes and lungs by using protective eyewear or a dust mask.

Always unplug it aftr use.

When the machine is not in use, all tool must be stored in a dry location abd keep out of reach of children.

Item Type: Nail Drill Machine

Package weight: 1.3 kg/pcs

Product Size ( L x W x H ):20.0*20.0*8.2cm

Package Size ( L x W x H ):41.5*41.5*35.5cm

Package Content: 1 x Nail Grinding Machine, 1 x English Manual, 1 x Charger, 1 x Bracket, 1xPedal

6 x Grinding Needle((includes 6pcs of emery rod and 6 sanding bands)